The ContiLube II.
Lubrication boost for light breakers
01 September 2010
ATLAS Copco has launched the first automatic lubrication system for light hydraulic breakers.
ContiLube II micro system will benefit machine-operated hydraulic breakers weighing less than 500 kg. It is directly attached to the adapter plate of the hydraulic breaker and is therefore particularly useful for rental fleets because the lubrication system remains connected with the hydraulic breaker when the carrier unit is changed.
The ContiLube II micro’s casing houses a compact pump, which bleeds air all by itself and which only supplies chisel paste if needed. This provides optimum protection of the hydraulic breaker guaranteeing chisel paste is consumed not more than what is absolutely necessary for the job.
The operator can easily monitor the chisel paste level inside the cartridge. The screw thread allows the cartridge to be changed without difficulty. Cartridges are filled with 150 g of highly viscose Atlas Copco chisel paste that can be refilled. For over 15 years heavy hydraulic breakers have been furnished with the ContiLube II system and more than 18,000 units are in operation worldwide.
- Coupling eases work on site
- Lubrication boost for light breakers
- Axor adds French flair to range
- Cat K Series builds on strong legacy
- Bobcat brush saw a quick worker
- Steel software suite sets new standards
- Next-generation Scada raises the bar
- Duravit Ketho range is simply elegant
- New Haulotte handlers reach farther
- Concepta opens door to haute design
