Gulf Construction Online - RMDK unveils next-gen CE marked girder system

Just Out

R800’s versatility enables it to tackle challenging terrain and build geometries with ease.

RMDK unveils next-gen CE marked girder system

01 May 2022

RMD Kwikform (RMDK), a global leader in formwork, shoring and groundworks solutions, has announced the launch of its next-generation, heavy-duty R800 modular panel girder system – which is claimed to be the only CE marked girder system available on the market.

Facilitating the construction of clear spanning and bridging structures, the R800 enables long lattice girders to be assembled quickly and safely.

“It is ideally suited to meet the most demanding requirements for simply supported, continuous/multi-span, cantilever or launched falsework, and vehicle, pedestrian, and service bridging,” says Ian Fryer, Divisional Product Innovation Director. “The system can also be used for structures in the media and events industry and in tieless formwork.”

“We’re thrilled to be bringing the new R800 system to market, it truly heralds the arrival of the next generation of spanning girder equipment. I’m proud of the strength, versatility, and fatigue credentials that the product development team have been able to incorporate into this system and the RMDK application engineers are looking forward to working with our customers to solve some hitherto very demanding structural and geometric challenges. We believe this system addresses a real gap in the market,” he comments.

According to Fryer, the R800 provides customers with assured peace of mind, as it is the only fully CE marked girder system available. Galvanised components produced in accordance with EN 1090 (Execution Class 3) guarantee a safe, reliable system and reduced cost of ownership over a long product life. Users will benefit from higher strength steels and optimised forged girder connections, which have been engineered to be equal in strength to the parts they connect, resulting in the highest available strength-to-weight ratio, and enhanced fatigue performance. In contrast, many alternative systems have their performance compromised because of reduced strength at the pin joints, he says.

Versatility is a key feature of R800 and enables it to tackle challenging terrain and build geometries with ease. “For instance, the R800 trapezoidal end panel enables support from the top chord, which reduces the required headroom and minimises clashes with battered abutments, while at the same time maximising opportunities for structural support using permanent works foundations. Uniquely, the trapezoidal panel can also be used inverted, affording the same geometry advantages for the support of spans supported by V-shaped piers, and arches,” Fryer says.

Further flexibility is provided by the inclusion of 4.5-m, 2.25-m and 1.25-m-long ‘quarter length’ girder panels, together with tapered end posts. When coupled with slidable bearings, these provide continuous and infinitely adjustable span length adjustment, enabling a better fit with permanent works piers and foundations, as well as facilitating the support of skewed spans with standard equipment.

Further advantages result from the R800’s compatibility with the RMDK 80kN Rapidshor falsework system, with screw jacks mating directly with the top chord of the R800 girder at the girder node points. Structurally this loads the R800 girders optimally, meaning fewer girders are required per scheme, but also enables pre-camber, longitudinal falls, and super-elevation to be handled without the need for full-on falsework above the girders, further reducing required headroom. Inclusion of the high shear girder at the ends of the falsework span can further reduce the numbers of girders required on site. The new panel girder system can also be used in conjunction with RMDK’s leading Megashor and Superslim products, for a truly versatile solution.

“The result of this is a heavy-duty solution that saves contractors time and money, while improving their sustainability credentials too. The versatility of the R800 range, combined with its industry leading strength-to-weight ratio minimises the amount of equipment required and therefore time to erect, which in turn reduces labour, plant, and transport costs, lowering overall carbon footprint,” he says.

For those keen to understand the capabilities of the R800 in greater detail, RDMK has developed 3D visualisations of the new system. Users can configure and interrogate the product by logging in to the LocusHub platform, which contains technical data, animations, and other helpful information for all products.